404 and 600 arinc filter connectors arinc 404 & 600 filter connectors carlisleit manufactures arinc 404 and arinc 600 filter connectors with qpld interfaces, front removable, front release size 22 contacts and modular construction. depending on performance requirements these connectors can be designed using either planar or chip-on-board technologies. all meet arinc specification requirements, are available in all the standard arrangements and come with pc tail, solder cup, crimp or wire wrap termination. carlisle interconnect technologies / 102 west julie drive, tempe, az 85283 phone - 480.730.5700 / fax - 480.730.5800 / carlisleit.com ? front release front removable #22 contacts ? planar and/or chip on board design ? ferrite immobilization ? modular filter backpack/standard shell construction ? can incorporate filtering plus transient voltage suppression design benefits design considerations introduction rectangular mating end contacts filter types* electrical environmental mounting hardware contact terminations arinc 404 pin c feed thru contacts thermal cycle clinch nut pc tails arinc 600 socket c/pi ground contacts thermal shock helicoil soldercup pi dwv min ____ vdc burn-in crimp pi/tvs sealed wire wrap tvs * maximum or mixed capacitance requirement? ____pf
arinc filter connectors carlisle interconnect technologies / 102 west julie drive, tempe, az 85283 phone - 480.730.5700 / fax - 480.730.5800 / carlisleit.com pi type filter attenuation frequency (mhz) insertion loss (db) 11 0 100 1000 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 -60.0 -70.0 pl pm pt ph pvh c type filter attenuation frequency (mhz) insertion loss (db) 11 0 100 1000 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 -60.0 -70.0 cl cm ct ch cvh attenuation graphs integrated structure with arinc trays and connectors ? carlisle interconnect technologies, 2012. all trademarks, service marks and trade names are property of their respective holding companies. all rights reserved. rev. 072312-2000
|
